Gecko [ 196.203.21.74 ]

Name	Size	Permission
.mad-root	0 B	-rw-rw-rw-
7zxa.dll	220.15 KB	-rw-rw-rw-
Default.SFX	326.5 KB	-rw-rw-rw-
Default64.SFX	377 KB	-rw-rw-rw-
Descript.ion	1.92 KB	-rw-rw-rw-
License.txt	6.72 KB	-rw-rw-rw-
Order.htm	3.34 KB	-rw-rw-rw-
Rar.exe	622.15 KB	-rwxrwxrwx
Rar.txt	109.01 KB	-rw-rw-rw-
RarExt.dll	658.15 KB	-rw-rw-rw-
RarExt32.dll	565.65 KB	-rw-rw-rw-
RarExtInstaller.exe	179.15 KB	-rwxrwxrwx
RarExtLogo.altform-unplated_ta...	2.13 KB	-rw-rw-rw-
RarExtLogo.altform-unplated_ta...	4.08 KB	-rw-rw-rw-
RarExtLogo.altform-unplated_ta...	6.09 KB	-rw-rw-rw-
RarExtPackage.msix	23.87 KB	-rw-rw-rw-
RarFiles.lst	1.24 KB	-rw-rw-rw-
ReadMe.txt	1.26 KB	-rw-rw-rw-
Resources.pri	1.6 KB	-rw-rw-rw-
UnRAR.exe	422.15 KB	-rwxrwxrwx
Uninstall.exe	429.15 KB	-rwxrwxrwx
Uninstall.lst	793 B	-rw-rw-rw-
WhatsNew.txt	105.82 KB	-rw-rw-rw-
WinCon.SFX	294.5 KB	-rw-rw-rw-
WinCon64.SFX	346 KB	-rw-rw-rw-
WinRAR.chm	317.89 KB	-rw-rw-rw-
WinRAR.exe	2.45 MB	-rwxrwxrwx
Zip.SFX	278.5 KB	-rw-rw-rw-
Zip64.SFX	317 KB	-rw-rw-rw-
pwnkit	10.99 KB	-rw-rw-rw-
rarnew.dat	24 B	-rw-rw-rw-
zipnew.dat	22 B	-rw-rw-rw-

Code Editor : Rar.txt

User's Manual
                             ~~~~~~~~~~~~~
                        RAR 6.24 console version
                        ~~~~~~~~~~~~~~~~~~~~~~~~

=-=-=-=-=-=-=-=-=-=-=-=-=-=-
                       Welcome to the RAR Archiver!
                       -=-=-=-=-=-=-=-=-=-=-=-=-=-=

Introduction
 ~~~~~~~~~~~~

RAR is a console application allowing to manage archive files
  in command line mode. RAR provides compression, encryption,
  data recovery and many other functions described in this manual.

RAR supports only RAR format archives, which have .rar file name
  extension by default. ZIP and other formats are not supported.
  Even if you specify .zip extension when creating an archive, it will
  still be in RAR format. Windows users may install WinRAR, which supports
  more archive types including RAR and ZIP formats.

WinRAR provides both graphical user interface and command line mode.
  While console RAR and GUI WinRAR have the similar command line syntax,
  some differences exist. So it is recommended to use this rar.txt manual
  for console RAR (rar.exe in case of Windows version) and winrar.chm
  WinRAR help file for GUI WinRAR (winrar.exe).

Configuration file
 ~~~~~~~~~~~~~~~~~~

RAR and UnRAR for Unix read configuration information from .rarrc file
  in a user's home directory (stored in HOME environment variable)
  or in /etc directory.

RAR and UnRAR for Windows read configuration information from rar.ini file,
  placed in the same directory as the rar.exe file.

This file can contain the following string:

switches=<any RAR switches separated by spaces>

For example:

switches=-m5 -s

It is also possible to specify separate switch sets for individual
  RAR commands using the following syntax:

switches_<command>=<any RAR switches separated by spaces>

For example:

switches_a=-m5 -s
  switches_x=-o+

Environment variable
 ~~~~~~~~~~~~~~~~~~~~

Default parameters may be added to the RAR command line by establishing
    an environment variable "RAR".

For instance, in Unix following lines may be added to your profile:

RAR='-s -md1024'
      export RAR

RAR will use this string as default parameters in the command line and
    will create "solid" archives with 1024 MB sliding dictionary size.

RAR handles options with priority as following:

command line switches                   highest priority
       switches in the RAR variable            lower priority
       switches saved in configuration file    lowest priority

Log file
 ~~~~~~~~

If switch -ilog is specified in the command line or configuration file,
  RAR will write informational messages about errors encountered while
  processing archives into a log file. Read the switch -ilog description
  for more details.

The file order list for solid archiving - rarfiles.lst
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

rarfiles.lst contains a user-defined file list, which tells RAR
  the order in which to add files to a solid archive. It may contain
  file names, wildcards and special entry - $default. The default
  entry defines the place in order list for files not matched
  with other entries in this file. The comment character is ';'.

In Windows this file should be placed in the same directory as RAR
  or in %APPDATA%\WinRAR directory, in Unix - to the user's home directory
  or in /etc.

Tips to provide improved compression and speed of operation:

- similar files should be grouped together in the archive;
  - frequently accessed files should be placed at the beginning.

Normally masks placed nearer to the top of list have a higher priority,
  but there is an exception from this rule. If rarfiles.lst contains such
  two masks that all files matched by one mask are also matched by another,
  that mask which matches a smaller subset of file names will have higher
  priority regardless of its position in the list. For example, if you have
  *.cpp and f*.cpp masks, f*.cpp has a higher priority, so the position of
  'filename.cpp' will be chosen according to 'f*.cpp', not '*.cpp'.

RAR command line syntax
 ~~~~~~~~~~~~~~~~~~~~~~~

Syntax

RAR <command> [ -<switches> ] <archive> [ <@listfiles...> ]
 [ <files...> ] [ <path_to_extract\> ]

Description

Command is a single character or string specifying an action to be
    performed by RAR. Switches are designed to modify the way RAR performs
    such action. Other parameters are archive name and files to be archived
    or extracted.

Listfiles are plain text files containing names of files to process.
    File names must start at the first column. It is possible to
    put comments to the listfile after // characters. For example,
    you can create backup.lst containing the following strings:

c:\work\doc\*.txt         //backup text documents
    c:\work\image\*.bmp       //backup pictures
    c:\work\misc

and then run:

rar a backup @backup.lst

If you wish to read file names from stdin (standard input),
    specify the empty listfile name (just @).

By default, console RAR uses the single byte encoding in list files,
 but it can be redefined with -sc<charset>l switch.

You can specify both usual file names and list files in the same
    command line. If neither files nor listfiles are specified,
    then *.* is implied and RAR will process all files.

path_to_extract includes the destination directory name followed by
 a path separator character. For example, it can be c:\dest\ in Windows
 or data/ in Unix. It specifies the directory to place extracted files
 in 'x' and 'e' commands. This directory is created by RAR if it does not
 exist yet. Alternatively it can be set with -op<path> switch.

Many RAR commands, such as extraction, test or list, allow to use
    wildcards in archive name. If no extension is specified in archive
    mask, RAR assumes .rar, so * means all archives with .rar extension.
    If you need to process all archives without extension, use *. mask.
    *.* mask selects all files. Wildcards in archive name are not allowed
    when archiving and deleting.

In Unix you need to enclose RAR command line parameters containing
    wildcards in single or double quotes to prevent their expansion
    by Unix shell. For example, this command will extract *.asm files
    from all *.rar archives in current directory:

rar e '*.rar' '*.asm'

Command could be any of the following:

a       Add files to archive.

Examples:

1) add all *.hlp files from the current directory to
            the archive help.rar:

rar a help *.hlp

2) archive all files from the current directory and subdirectories
            to 362000 bytes size solid, self-extracting volumes
            and add the recovery record to each volume:

rar a -r -v362 -s -sfx -rr save

Because no file names are specified, all files (*) are assumed.

3) as a special exception, if directory name is specified as
            an argument and if directory name does not include file masks
            and trailing path separator, the entire contents of the directory
            and all subdirectories will be added to the archive even
            if switch -r is not specified.

The following command will add all files from the directory
            Bitmaps and its subdirectories to the RAR archive Pictures.rar:

rar a Pictures.rar Bitmaps

4) if directory name includes the trailing path separator,
            normal rules apply and you need to specify switch -r to process
            its subdirectories.

The following command will add all files from directory Bitmaps,
            but not from its subdirectories, because switch -r is not
            specified:

rar a Pictures.rar Bitmaps\*

c       Add archive comment. Comments are displayed while the archive is
            being processed. Comment length is limited to 256 KB.

Examples:

rar c distrib.rar

Also comments may be added from a file using -z[file] switch.
            The following command adds a comment from info.txt file:

rar c -zinfo.txt dummy

ch      Change archive parameters.

This command can be used with most of archive modification
            switches to modify archive parameters. It is especially
            convenient for switches like -cl, -cu, -tl, which do not
            have a dedicated command.

It is not able to recompress, encrypt or decrypt archive data
            and it cannot merge or create volumes. If no switches are
            specified, 'ch' command just copies the archive data without
            modification.

If used with -amr switch to restore the saved archive name
            and time, other archive modification switches are ignored.

Example:

Set archive time to latest file:

rar ch -tl files.rar

cw      Write archive comment to specified file.

Format of output file depends on -sc switch.

If output file name is not specified, comment data will be
            sent to stdout.

Examples:

1) rar cw arc comment.txt

2) rar cw -scuc arc unicode.txt

3) rar cw arc

d       Delete files from archive. If this command removes all files
            from archive, the empty archive is removed.

e       Extract files without archived paths.

Extract files excluding their path component, so all files
            are created in the same destination directory.

Use 'x' command if you wish to extract full pathnames.

Example:

rar e -or html.rar *.css css\

extract all *.css files from html.rar archive to 'css' directory
            excluding archived paths. Rename extracted files automatically
            in case several files have the same name.

f       Freshen files in archive. Updates archived files older
            than files to add. This command will not add new files
            to the archive.

i[i|c|h|t]=<string>
 Find string in archives.

Supports following optional parameters:

i - case insensitive search (default);

c - case sensitive search;

h - hexadecimal search;

t - use ANSI, UTF-8, UTF-16 and OEM (Windows only)
                  character tables;

If no parameters are specified, it is possible to use
 the simplified command syntax i<string> instead of i=<string>

It is allowed to specify 't' modifier with other parameters,
            for example, ict=string performs case sensitive search
            using all mentioned above character tables.

Examples:

1) rar "ic=first level" -r c:\*.rar *.txt

Perform case sensitive search of "first level" string
            in *.txt files in *.rar archives on the disk c:

2) rar ih=f0e0aeaeab2d83e3a9 -r e:\texts\*.rar

Search for hex string f0 e0 ae ae ab 2d 83 e3 a9
            in rar archives in e:\texts directory.

k       Lock archive.
    
            RAR cannot modify locked archives, so locking important archives
            prevents their accidental modification by RAR. Such protection
            might be especially useful in case of RAR commands processing
            archives in groups.

This command is not intended or able to prevent modification
            by other tools or willful third party. It implements a safety
            measure only for accidental data change by RAR.

Example:

rar k final.rar

l[t[a],b]
            List archive contents [technical [all], bare].
    
            'l' command lists archived file attributes, size, date,
            time and name, one file per line. If file is encrypted,
            line starts from '*' character.

'lt' displays the detailed file information in multiline mode.
            This information includes file checksum value, host OS,
            compression options and other parameters.

'lta' provide the detailed information not only for files,
            but also for service headers like NTFS streams
            or file security data.

'lb' lists bare file names with path, one per line,
            without any additional information.

You can use -v switch to list contents of all volumes
            in volume set: rar l -v vol.part1.rar

Commands 'lt', 'lta' and 'lb' are equal to 'vt', 'vta'
            and 'vb' correspondingly.

m[f]    Move to archive [files only]. Moving files and directories
            results in the files and directories being erased upon
            successful completion of the packing operation. Directories will
            not be removed if 'f' modifier is used and/or '-ed' switch is
            applied.

p       Print file to stdout.

Send unpacked file data to stdout. Informational messages
            are suppressed with this command, so they are not mixed
            with file data.

r       Repair archive. Archive repairing is performed in two stages.
            First, the damaged archive is searched for a recovery record
            (see 'rr' command). If archive contains the previously added
            recovery record and if damaged data area is continuous
            and smaller than error correction code size in recovery record,
            chance of successful archive reconstruction is high.
            When this stage has been completed, a new archive is created,
            named as fixed.arcname.rar, where 'arcname' is the original
            (damaged) archive name.

If broken archive does not contain a recovery record or if
            archive is not completely recovered due to major damage,
            second stage is performed. During this stage only the archive
            structure is reconstructed and it is impossible to recover
            files which fail checksum validation, it is still possible,
            however, to recover undamaged files, which were inaccessible
            due to the broken archive structure. Mostly this is useful
            for non-solid archives. This stage is never efficient
            for archives with encrypted file headers, which can be repaired
            only if recovery record is present.

When the second stage is completed, the reconstructed archive
            is saved as rebuilt.arcname.rar, where 'arcname' is
            the original archive name.

By default, repaired archives are created in the current
            directory, but you can append an optional destpath\ parameter
            to specify another destination directory.

Example:

rar r buggy.rar c:\fixed\

repair buggy.rar and place the result to 'c:\fixed' directory.

rc      Reconstruct missing and damaged volumes using recovery volumes
            (.rev files). You need to specify any existing  .rar or .rev
            volume as the archive name.

Example:

rar rc backup.part03.rar

Read 'rv' command description for information about
            recovery volumes.

rn      Rename archived files.

The command syntax is:

rar rn <arcname> <srcname1> <destname1> ... <srcnameN> <destnameN>

For example, the following command:

rar rn data.rar readme.txt readme.bak info.txt info.bak

will rename readme.txt to readme.bak and info.txt to info.bak
            in the archive data.rar.

It is allowed to use wildcards in the source and destination
            names for simple name transformations like changing file
            extensions. For example:

rar rn data.rar *.txt *.bak

will rename all *.txt files to *.bak.

RAR does not check if the destination file name is already
            present in the archive, so you need to be careful to avoid
            duplicated names. It is especially important when using
            wildcards. Such a command is potentially dangerous, because
            a wrong wildcard may corrupt all archived names.

rr[N]   Add data recovery record. Optionally, redundant information
            (recovery record) may be added to archive. While it increases
            the archive size, it helps to recover archived files in case of
            disk failure or data loss of other kind, provided that damage
            is not too severe. Such damage recovery can be done with
            command "r" (repair).

RAR 4.x and RAR 5.0 archives use different recovery record
            structure and algorithms.

RAR 4.x recovery record is based on XOR algorithm.
            You can specify 4.x record size as a number of recovery sectors
            or as a percent of archive size. To specify a number of sectors
            just add it directly after 'rr', like 'rr1000' for 1000 sectors.
            To use a percent append 'p' or '%' modifier after the percent
            number, such as 'rr5p' or 'rr5%' for 5%. Note that in Windows
            .bat and .cmd files it is necessary to use 'rr5%%' instead of
            'rr5%', because the command processor treats the single '%'
            as the start of a batch file parameter, so it might be more
            convenient to use 'p' instead of '%' in this case.

RAR 4.x recovery sectors are 512 bytes long. If damaged area
            is continuous, every sector helps to recover 512 bytes of
            damaged information. This value may be lower in cases of
            multiple damage. Maximum number of recovery sectors is 524288.

Size of 4.x recovery record may be approximately determined as
 <archive size>/256 + <number of recovery sectors>*512 bytes
 and cannot exceed the protected data size or 256 MB,
 whatever is less.

RAR 5.0 recovery record uses Reed-Solomon error correction codes.
            Its ability to repair continuous damage is about the same
            as for RAR 4.x, allowing to restore slightly less data than
            recovery record size. But it is more efficient than RAR 4.x
            record in case of multiple damaged areas and shifted data
            positions.

RAR 5.0 record does not use 512 byte sectors and you can specify
            its size only as a percent of archive size. Even if '%' or 'p'
            modifier is not present, RAR treats the value as a percent
            in case of RAR 5.0 format, so both 'rr5' and 'rr5p' mean 5%.
            Due to service data overhead the actual resulting recovery record
            size only approximately matches the user defined percent
            and difference is larger for smaller archives.

Maximum allowed RAR 5.0 recovery record size is 1000%.
            Larger recovery records are processed slower both when creating
            and repairing.

RAR 5.0 recovery record is more resistant to damage of recovery
            record itself and can utilize a partially corrupt recovery
            record data. Note, though, that 'R' repair command does not fix
            broken blocks in recovery record. Only file data are corrected.
            After successful archive repair, you may need to create a new
            recovery record for saved files.

If you use the plain 'rr' command without optional parameter,
            RAR will set the recovery record size to 3% of archive size
            by default.

While the recovery record improves chances to repair damaged
            archives, it does not guarantee the successful recovery.
            Consider combining the recovery record feature with making
            multiple archive copies to different media for important data.

Example:

rar rr5p arcname

add the recovery record of 5% of archive size.

rv[N]   Create recovery volumes (.rev files), which can be later
            used to reconstruct missing and damaged files in a volume
            set. This command makes sense only for multivolume archives
            and you need to specify the name of the first volume
            in the set as the archive name. For example:

rar rv3 data.part01.rar

This feature may be useful for backups or, for example,
            when you posted a multivolume archive to a newsgroup
            and a part of subscribers did not receive some of the files.
            Reposting recovery volumes instead of usual volumes
            may reduce the total number of files to repost.

Each recovery volume is able to reconstruct one missing
            or damaged RAR volume. For example, if you have 30 volumes
            and 3 recovery volumes, you are able to reconstruct any
            3 missing volumes. If the number of .rev files is less than
            the number of missing volumes, reconstructing is impossible.
            The total number of usual and recovery volumes must not
            exceed 255 for RAR 4.x and 65535 for RAR 5.0 archive format.

Original RAR volumes must not be modified after creating
            recovery volumes. Recovery algorithm uses data stored both
            in REV files and in RAR volumes to rebuild missing RAR volumes.
            So if you modify RAR volumes, for example, lock them, after
            creating REV files, recovery process will fail.

Additionally to recovery data, RAR 5.0 recovery volumes
            also store service information such as checksums of protected
            RAR files. So they are slightly larger than RAR volumes
            which they protect. If you plan to copy individual RAR and REV
            files to some removable media, you need to take it into account
            and specify RAR volume size by a few kilobytes smaller
            than media size.

The optional <N> parameter specifies a number of recovery
 volumes to create. It must be less than the total number of
 RAR volumes in the set for RAR 4.x and must not be larger
 than tenfold amount of RAR volumes for RAR 5.0 format.
 Values exceeding the threshold are adjusted automatically.

You may also append a percent or 'p' character to this parameter,
            in such case the number of creating .rev files will be equal to
            this percent taken from the total number of RAR volumes.
            For example:

rar rv15% data.part01.rar

If <N> parameter is omitted, it is set to 10%.

RAR reconstructs missing and damaged volumes either when
            using 'rc' command or automatically, if it cannot locate
            the next volume and finds the required number of .rev files
            when unpacking.

Original copies of damaged volumes are renamed to *.bad
            before reconstruction. For example, volname.part03.rar
            will be renamed to volname.part03.rar.bad.

s[name] Convert archive to SFX. The archive is merged with a SFX module
            (using a module in file default.sfx or specified in the switch).
            In the Windows version default.sfx should be placed in the
            same directory as the rar.exe, in Unix - in the user's
            home directory, in /usr/lib or /usr/local/lib.

s-      Remove SFX module from the already existing SFX archive.
            RAR creates a new archive without SFX module, the original
            SFX archive is not deleted.

t       Test archive files. This command performs a dummy file
            extraction, writing nothing to the output stream, in order to
            validate the specified file(s).

Examples:

Test archives in current directory:

rar t *

or for Unix:

rar t '*'

User may test archives in all sub-directories, starting
            with the current path:

rar t -r *

or for Unix:

rar t -r '*'

u       Update files in archive. Adds files not yet in the archive
            and updates archived files that are older than files to add.

v[t[a],b]
            Verbosely list archive contents [technical [all], bare].
    
            'v' command lists archived file attributes, size, packed size,
            compression ratio, date, time, checksum and name, one file
            per line. If file is encrypted, line starts from '*' character.
            For BLAKE2sp checksum only two first and one last symbol are
            displayed.

'vt' displays the detailed file information in multiline mode.
            This information includes file checksum value, host OS,
            compression options and other parameters.

'vta' provide the detailed information not only for files,
            but also for service headers like NTFS streams
            or file security data.

'vb' lists bare file names with path, one per line,
            without any additional information.

You can use -v switch to list contents of all volumes
            in volume set: rar v -v vol.part1.rar

Commands 'vt', 'vta' and 'vb' are equal to 'lt', 'lta'
            and 'lb' correspondingly.

x       Extract files with full path.

Examples:

1) extract 10cents.txt to current directory not displaying
               the archive comment

rar x -c- dime 10cents.txt

2) extract *.txt from docs.rar to c:\docs directory

rar x docs.rar *.txt c:\docs\

3) extract the entire contents of docs.rar to current directory

rar x docs.rar

Switches (used in conjunction with a command):

-?      Display help on commands and switches.
            Same as none or illegal command line option are entered.

--      Stop switches scanning

This switch tells to RAR that there are no more switches
            in the command line. It could be useful, if either archive
            or file name starts from '-' character. Without '--' switch
            such a name would be treated as a switch.

Example:

add all files from the current directory to the solid archive
            '-StrangeName'

RAR a -s -- -StrangeName

-@[+]   Disable [enable] file lists

RAR treats command line parameters starting from '@' character
            as file lists. So by default, RAR attempts to read 'filename'
            filelist, when encountering '@filename' parameter.
            But if '@filename' file exists, RAR treats the parameter
            as '@filename' file instead of reading the file list.

Switch -@[+] allows to avoid this ambiguity and strictly
            define how to handle parameters starting from '@' character.

If you specify -@, all such parameters found after this switch
            will be considered as file names, not file lists.

If you specify -@+, all such parameters found after this switch
            will be considered as file lists, not file names.

This switch does not affect processing parameters located
            before it.

Example:

test the archived file '@home'

rar t -@ notes.rar @home

-ac     Clear Archive attribute after compression or extraction
            (Windows version only).

If -ac is specified when archiving, "Archive" file attribute
            is cleared for successfully compressed files. When extracting,
            -ac will clear "Archive" attribute for extracted files.
            This switch does not affect directory attributes.

-ad[1,2]
            Alternate destination path.

This option may be useful when unpacking a group of archives.

Switches -ad and -ad1 create a separate directory for files
            unpacked from each archive. These separate directories are
            created in destination directory for -ad and in each archive's
            directory for -ad1.

Switch -ad2 places unpacked files directly to each archive's
            directory. Separate directories are not created.

Destination directory parameter is ignored for -ad1 and -ad2
            switches.

Examples:

1) rar x -ad *.rar data\

RAR will create subdirectories below 'data'
               for every unpacking archive.

2) rar x -r -ad1 arc\*.rar

RAR will recursively scan 'arc' directory for *.rar archives
               and create subdirectories in each archive's directory.

-ag[format]
            Generate archive name using the current date and time.

Appends the current date string to an archive name when
            creating or processing an archive. Useful for daily backups.

Format of the appending string is defined by the optional
            "format" parameter or by "YYYYMMDDHHMMSS" if this parameter
            is absent. The format string may include the following
            characters:

Y   - year
            M   - month
            MMM - month name as text string (Jan, Feb, etc.)
            W   - a week number (a week starts with Monday)
            A   - day of week number (Monday is 1, Sunday - 7)
            D   - day of month
            E   - day of year
            H   - hours
            M   - minutes (first two 'M' after hours treated as minutes)
            I   - minutes (treated as minutes regardless of hours position)
            S   - seconds
            N   - archive number. RAR searches for already existing archive
                  with generated name and if found, increments the archive
                  number until generating a unique name. 'N' format character
                  is not supported when creating volumes.
                  When performing non-archiving operations like extracting,
                  RAR selects the existing archive preceding the first
                  unused name or sets N to 1 if no such archive exists.

Each of format string characters listed above represents only
            one character added to archive name. For example, use WW for
            two digit week number or YYYY to define four digit year.

If the first character in the format string is '+', positions
            of the date string and base archive name are exchanged,
            so a date will precede an archive name.

If the first character in the format string is 'F', the rest of
 string specifies the default format string for -ag switch.
 Such -agf<default_format> switch has a practical value only
 if placed to rar.ini configuration file or RAR environment
 variable. For example, if we set RAR environment variable to
 -agfYYYY-MMM-DD, we can use -ag without a parameter with 
 YYYY-MMM-DD format string assumed.

The format string may contain optional text enclosed in '{'
            and '}' characters. This text is inserted into archive name.

All other characters are added to an archive name without
            changes.

If you need to process an already existing archive, be careful
            with -ag switch. Depending on the format string and time passed
            since previous -ag use, generated and existing archive names
            may mismatch. In this case RAR will create or open a new archive
            instead of processing the already existing one. You may use
            -log switch to write the generated archive name to a file
            and then read it from file for further processing.

Examples:

1) use the default YYYYMMDDHHMMSS format

rar a -ag backup

2) use DD-MMM-YY format

rar t -agDD-MMM-YY backup

3) use YYYYMMDDHHMM format, place date before 'backup'

rar a -ag+YYYYMMDDHHMM backup

4) use YYYY-WW-A format, include fields description

rar a -agYYYY{year}-WW{week}-A{wday} backup

5) use YYYYMMDD and the archive number. It allows to generate
               unique names even when YYYYMMDD format mask used more than
               once in the same day

rar a -agYYYYMMDD-NN backup

-ai     Ignore file attributes.

If this switch is used when extracting, RAR does not set
            general file attributes stored in archive to extracted files.
            This switch preserves attributes assigned by operating system
            to a newly created file.

If this switch is used when archiving, predefined values,
            typical for file and directory, are stored instead of actual
            attributes.

In Windows it affects archive, system, hidden and read-only
            attributes. in Unix - user, group, and other file permissions.

-am[s,r]
            Archive name and time [save, restore]

Switch -ams preserves the archive metadata, which includes
            the original archive name and creation time. It can be used
            with archive modification commands, such as 'a' or 'ch'.
            Saved metadata is displayed in header of 'l' and 'v' archive
            list commands.

If used together with -tk or -tl switches, -ams saves
            the archive modification time set by these switches.

Switch -amr renames an archive to saved name. Also it sets
            the stored time as the archive creation and modification time
            in Windows and as the archive modification time in Unix.
            It can be used together with 'ch' command only, which ignores
            all other archive modification switches if -amr is specified.

Switch -am without 's' and 'r' modifiers is treated as -ams.

Examples:

1) create files.rar and save its metadata

rar a -am files.rar

2) restore the original name of myfiles.rar

rar ch -amr myfiles.rar

-ao     Add files with "Archive" attribute set
            (Windows version only).

If -ao is used when archiving, only files with "Archive"
            file attribute will be added to archive. This switch does not
            affect directories, so all matching directories are added
            regardless of their attributes. You can also specify -ed switch
            if you prefer to omit all directory records.

Example:

add all disk C: files with "Archive" attribute set
            to the 'f:backup' and clear files "Archive" attribute

rar a -r -ac -ao f:backup c:\*.*

-ap<path>
 Set path inside archive. This path is merged to file
 names when adding files to an archive and removed
 from file names when extracting.

For example, if you wish to add the file 'readme.txt'
            to the directory 'DOCS\ENG' of archive 'release',
            you may run:

rar a -apDOCS\ENG release readme.txt

or to extract 'ENG' to the current directory:

rar x -apDOCS release DOCS\ENG\*.*

-as     Synchronize archive contents

If this switch is used when archiving, those archived files
            which are not present in the list of the currently added
            files, will be deleted from the archive. It is convenient to
            use this switch in combination with -u (update) to synchronize
            contents of archive and archiving directory.

For example, after the command:

rar a -u -as backup sources\*.cpp

the archive 'backup.rar' will contain only *.cpp files
            from directory 'sources', all other files will be deleted
            from the archive. It looks similar to creating a new archive,
            but with one important exception: if no files are modified
            since the last backup, the operation is performed much faster
            than the creation of a new archive.

-cfg-   Ignore configuration file and RAR environment variable.

-cl     Convert file names to lower case.

-cu     Convert file names to upper case.

-c-     Disable comments show.

-df     Delete files after archiving

Move files to archive. This switch in combination with
            the command "A" performs the same action as the command "M".

-dh     Open shared files

Allows to process files opened by other applications
            for writing.

This switch helps if an application allowed read access
            to file, but if all types of file access are prohibited,
            the file open operation will still fail.

This option could be dangerous, because it allows
            to archive a file, which at the same time is modified
            by another application, so use it carefully.

-dr     Delete files to Recycle Bin

Delete files after archiving and place them to Recycle Bin.
            Available in Windows version only.

-ds     Do not sort files while adding to a solid archive.

-dw     Wipe files after archiving

Delete files after archiving. Before deleting file data
            are overwritten by zero bytes to prevent recovery of deleted
            files, file is truncated and renamed to temporary name.

Please be aware that such approach is designed for usual
            hard disks, but may fail to overwrite the original file data
            on solid state disks, as result of SSD wear leveling technology
            and more complicated data addressing.

-ed     Do not add empty directories

This switch indicates that directory records are not to be
            stored in the created archive. When extracting such archives,
            RAR creates non-empty directories based on paths of files
            contained in them. Information about empty directories is
            lost. All attributes of non-empty directories except a name
            (access rights, streams, etc.) will be lost as well, so use
            this switch only if you do not need to preserve such information.

If -ed is used with 'm' command or -df switch, RAR will not
            remove empty directories.

-ep     Exclude paths from names. This switch enables files to be
            added to an archive without including the path information.
            This could result in multiple files with the same name
            existing in the archive.

If used when extracting, archived paths are ignored
            for extracted files, so all files are created in the same
            destination directory.

-ep1    Exclude base dir from names. Do not store or extract the path
            entered in the command line. Ignored if path includes wildcards.

Examples:

1) add all files and directories from 'tmp' directory to archive
               'test', but exclude 'tmp\' from archived names path:

rar a -ep1 -r test tmp\*

This is an equivalent to commands:

cd tmp
               rar a -r ..\test
               cd ..

2) extract files matching images\* mask to dest\ directory,
               but remove 'images\' from paths of created files:

rar x -ep1 data images\* dest\

-ep2    Expand paths to full. Store full file paths (except the drive
            letter and leading path separator) when archiving.

-ep3    Expand paths to full including the drive letter.
            Windows version only.

This switch stores full file paths including the drive
            letter if used when archiving. Drive separators (colons)
            are replaced by underscore characters.

If you use -ep3 when extracting, it will change
            underscores back to colons and create unpacked files
            in their original directories and disks. If the user
            also specified a destination path, it will be ignored.

It also converts UNC paths from \\server\share to
            __server\share when archiving and restores them to
            the original state when extracting.

This switch can help to backup several disks to the same
            archive. For example, you may run:

rar a -ep3 -r backup.rar c:\ d:\ e:\

to create backup and:

rar x -ep3 backup.rar

to restore it.

But be cautious and use -ep3 only if you are sure that
            extracting archive does not contain any malicious files.
            In other words, use it if you have created an archive yourself
            or completely trust its author. This switch allows to overwrite
            any file in any location on your computer including important
            system files and should normally be used only for the purpose
            of backup and restore.

-ep4<path>
 Exclude the path prefix from names.

If this switch is used when archiving, the specified path
            is excluded from archived names if it is found in the beginning
            of such name, but does not match the entire name. Comparison
            is performed with names already prepared to store in archive,
            with removed drive letters and leading path separators.

For example:

rar a -ep4texts\books archive c:\texts\books\technical

removes "text\books" from archived names, so they start
            from 'technical'. Since comparison is performed with names,
            as they are stored in archive, we can't use -ep4c:\texts\books.

If this switch is used when extracting, it works similarly to
 -ap<path> switch. Path is removed if it is present
 in the beginning of archived file name. For example:

rar x -ep4texts\books archive

removes 'texts\books' from those archived paths,
            which start from it.

-e[+]<attr>
 Specifies file exclude or include attributes mask.

<attr> is a number in the decimal, octal (with leading '0')
 or hex (with leading '0x') format.

By default, without '+' sign before <attr>, this switch
 defines the exclude mask. So if result of bitwise AND between
 <attr> and file attributes is nonzero, file would not be
 processed.

If '+' sign is present, it specifies the include mask.
            Only those files which have at least one attribute specified
            in the mask will be processed.

In Windows version is also possible to use symbols D, S, H,
            A and R instead of a digital mask to denote directories
            and files with system, hidden, archive and read-only attributes.
            The order in which the attributes are given is not significant.
            Unix version supports D and V symbols to define directory
            and device attributes.

It is allowed to specify both -e<attr> and -e+<attr>
 in the same command line.

Examples:

1) archive only directory names without their contents

rar a -r -e+d dirs

2) do not compress system and hidden files:

rar a -esh files

3) do not extract read-only files:

rar x -er files

-f      Freshen files. May be used with archive extraction or creation.
            The command string "a -f" is equivalent to the command 'f', you
            could also use the switch '-f' with the commands 'm' or 'mf'. If
            the switch '-f' is used with the commands 'x' or 'e', then only
            old files would be replaced with new versions extracted from the
            archive.

-hp[p]  Encrypt both file data and headers.

This switch is similar to -p[pwd], but switch -p encrypts
            only file data and leaves other information like file names
            visible. This switch encrypts all sensitive archive areas
            including file data, file names, sizes, attributes, comments
            and other blocks, so it provides a higher security level.
            Without a password it is impossible to view even the list of
            files in archive encrypted with -hp.

Example:

rar a -hpfGzq5yKw secret report.txt

will add the file report.txt to the encrypted archive
            secret.rar using the password 'fGzq5yKw'

-ht[b|c]
            Select hash type [BLAKE2,CRC32] for file checksum.

File data integrity in RAR archive is protected by checksums
            calculated and stored for every archived file.

By default, RAR uses CRC32 function to calculate the checksum.
            RAR 5.0 archive format also allows to select BLAKE2sp hash
            function instead of CRC32.

Specify -htb switch for BLAKE2sp and -htc for CRC32 hash function.
            Since CRC32 is the default algorithm, you may need -htc only to
            override -htb in RAR configuration.

CRC32 output is 32 bit length. While CRC32 properties are
            suitable to detect most of unintentional data errors,
            it is not reliable enough to verify file data identity.
            In other words, if two files have the same CRC32,
            it does not guarantee that file contents is the same.

BLAKE2sp output is 256 bit. Being a cryptographically strong
            hash function, it practically guarantees that if two files
            have the same value of BLAKE2sp, their contents is the same.
            BLAKE2sp error detection property is also more reliable than
            in shorter CRC32.
            
            Since BLAKE2sp output is longer, resulting archive is
            slightly larger for -htb switch.

If archive headers are unencrypted (no switch -hp), checksums
            for encrypted RAR 5.0 files are modified using a special
            password dependent algorithm, to make impossible guessing
            file contents based on checksums. Do not expect such encrypted
            file checksums to match usual CRC32 and BLAKE2sp values.
            
            This switch is supported only by RAR 5.0 format, so you
            need to use -ma switch with it.

You can see checksums of archived files using 'vt' or 'lt'
            commands.

Example:

rar a -ma -htb lists.rar *.lst

will add *.lst to lists.rar using BLAKE2sp for file checksums.

-id[c,d,n,p,q]
            Display or disable messages.

Switch -idc disables the copyright string.

Switch -idd disables "Done" string at the end of operation.

Switch -idn disables archived names output when creating,
            testing or extracting an archive. It disables directory creation
            messages when unpacking a file to non-existing directory.
            It can affect some other archive processing commands as well.
            It does not hide other messages and total percentage indicator.
            Minor visual artifacts, such as percentage indicator overwriting
            few last characters of error messages, are possible with -idn.

Switch -idp disables the percentage indicator.

Switch -idq turns on the quiet mode, so only error messages
            and questions are displayed.

It is allowed to use several modifiers at once,
            so switch -idcdp is correct.

-ieml[.][addr]
            Send archive by email. Windows version only.

Attach an archive created or updated by the add command
            to email message. You need to have a MAPI compliant email
            client to use this switch (most modern email programs
            support MAPI interface).

You may enter a destination email address directly
            in the switch or leave it blank. In the latter case you
            will be asked for it by your email program. It is possible
            to specify several addresses separated by commas or semicolons.

If you append a dot character to -ieml, an archive will be
            deleted after it was successfully attached to an email.
            If the switch is used when creating a multivolume archive,
            every volume is attached to a separate email message.

-ierr   Send all messages to stderr.

-ilog[name]
            Log errors to file.

Write error messages to rar.log file. If optional 'name'
            parameter is not specified, the log file is created
            using the following defaults:

Unix:    .rarlog file in the user's home directory;
            Windows: rar.log file in %APPDATA%\WinRAR directory.

If 'name' parameter includes a file name without path,
            RAR will create the log file in the default directory
            mentioned above using the specified name. Include both path
            and name to 'name' parameter if you wish to change
            the location of log file.

By default, log file uses UTF-16 little endian encoding,
 but it can be changed with -sc<charset>g switch, such as -scag
 for native single byte encoding.

Example:

rar a -ilogc:\log\backup.log backup d:\docs

will create c:\log\backup.log log file in case of errors.

-inul   Disable all messages.

-ioff[n]
            Turn PC off after completing an operation.

Use -ioff or -ioff1 to turn PC off, -ioff2 to hibernate,
            -ioff3 to sleep and -ioff4 to restart. Appropriate power features
            must be supported by operating system.

If several RAR copies are started with this switch,
            PC is turned off by a copy finished last.
            
            Windows version only.

-isnd[-]
            Control notification sounds.

Use -isnd to enable notification sounds and -isnd- to disable them.

-iver   Display the version number and quit. You can run just "RAR -iver".

-k      Lock archive.
    
            Prevents accidental archive modification by RAR.
            See the 'k' command description for details.

Example:

rar a -k final.rar srcfiles

-kb     Keep broken extracted files.

RAR, by default, deletes files with checksum errors
            after extraction. The switch -kb specifies that files
            with checksum errors should not be deleted.

-log[fmt][=name]
            Write names to log file.

This switch allows to write archive and file names to specified
            text file in archiving, extracting, deleting and listing commands.
            Its behavior is defined by 'fmt' string, which can include one
            or more of following characters:

A - write archive names to log file. If RAR creates or processes
                volumes, all volume names are logged.

F - write processed file names to log file. It includes
                files added to archive and extracted, deleted or listed
                files inside of archive.

P - if log file with specified name exists, append data
                to existing file instead of creating a new one.

U - write data in Unicode format.

If neither 'A' nor 'F' are specified, 'A' is assumed.

'name' parameter allows to specify the name of log file.
            It must be separated from 'fmt' string by '=' character.
            If 'name' is not present, RAR will use the default rarinfo.log
            file name.

It is allowed to specify several -log switches in the same
            command line.

This switch can be particularly useful, when you need to process
 an archive created with -ag or -v switches in a batch script.
 You can specify -loga=arcname.txt when creating an archive
 and then read an archive name generated by RAR from arcname.txt
 with an appropriate command. For example, in Windows batch file
 it can be: set /p name=<arcname.txt.

Examples:

1) write names of created volumes to vollist.txt:

rar a -v100m -loga=vollist.txt volume.rar c:\data

2) write the generated archive name to backup.txt in Unicode:

rar a -ag -logau=backup.txt backup.rar myfiles\*

3) write names of tested volumes to vollist.txt and names
               of tested archived files inside of volumes to filelist.txt:

rar t -log=vollist.txt -logf=filelist.txt volume.part01.rar

-m<n> Set compression method:

-m0   store     do not compress file when adding to archive
       -m1   fastest   use fastest method (less compressive)
       -m2   fast      use fast compression method
       -m3   normal    use normal (default) compression method
       -m4   good      use good compression method (more
                       compressive, but slower)
       -m5   best      use best compression method (slightly more
                       compressive, but slowest)

If this switch is not specified, RAR uses -m3 method
            (normal compression).

-ma[4|5]
            Specify a version of archiving format.

By default RAR creates archives in RAR 5.0 format.
            Use -ma4 to create RAR 4.x archives.
            Use -ma5 or just -ma in case you need to override -ma4 saved
            in configuration and force RAR to use RAR 5.0 format.

This switch is used only when creating a new archive.
            It is ignored when updating an existing archive.

-mc<par>
 Set advanced compression parameters.

This switch is intended mainly for benchmarking and
            experiments. In the real environment it is usually better
            to allow RAR to select optimal parameters automatically.
            Please note that improper use of this switch may lead
            to very serious performance and compression loss, so use
            it only if you clearly understand what you do.

It has the following syntax:

-mc[param1][:param2][module][+ or -]

where <module> is the one character field denoting a part
 of the compression algorithm, which has to be configured.

It may have the following values:

A       - audio compression;
              C       - true color (RGB) data compression;
              D       - delta compression;
              E       - x86 executable compression;
              T       - text compression.

RAR 5.0 archive format supports only 'D' and 'E' values.

'+' sign at the end of switch applies the selected algorithm
            module to all processed data, '-' disables the module at all.
            If no sign is specified, RAR will choose modules automatically,
            based on data and the current compression method.

Switch -mc- disables all optional modules and allows only
            the general compression algorithm.

<Param1> and <Param2> are module dependent parameters
 described below.

Audio compression, delta compression:

<Param1> is a number of byte channels (can be 1 - 31).
 RAR splits multibyte channels to bytes, for example,
 two 16-bit audio channels are considered by RAR as four
 channels one byte each.

<Param2> is ignored.

x86 Intel executable compression, true color (RGB) data
            compression:

<Param1> and <Param2> are ignored.

Text compression:

Text compression algorithm provides noticeably higher compression
            on plain text data. But it cannot utilize several CPU cores
            efficiently resulting in slower compression time comparing to
            general algorithm in multicore and multiprocessor environment.
            Also its decompression speed is much slower than in general
            algorithm regardless of CPU cores number. This is why
            the text compression is disabled by default. You can specify
            -mct switch to allow RAR to select this algorithm automatically
            for suitable data. Switch -mct+ will force use of the text
            compression for all data.

Switch -mct can also include <Param1> and <Param2>, so its
 full syntax is -mc[param1][:param2]t[+ or -].

<Param1> is the order of PPM algorithm (can be 2 - 63).
 Usually a higher value slightly increases the compression ratio
 of redundant data, but only if enough memory is available
 to PPM. In case of lack of memory the result may be negative.
 Higher order values decrease both compression and decompression
 speed.

<Param2> is memory in megabytes allocated for PPM (1-128).
 Higher values may increase the compression ratio, but note
 that PPM uses the equal memory size both to compress and
 decompress, so if you allocate too much memory when creating
 an archive, other people may have problems when decompressing
 it on a computer with less memory installed. Decompression
 will be still possible using virtual memory, but it may
 become very slow.

Examples:

1) switch -mc1a+ forces use of 8-bit mono audio compression
            for all data.

2) switch -mc10:40t+ forces use of text compression
            algorithm for all data, sets the compression order to 10
            and allocates 40 MB memory.

3) switch -mc12t sets the text compression order to 12,
            when the text compression is used, but leaves to RAR to
            decide when to use it.

4) switches -mct -mcd- allow RAR to apply the text compression
            to suitable data and disable the delta compression.

-md<n>[k,m,g]
 Select the dictionary size.

Sliding dictionary is the memory area used by compression
            algorithm to find and compress repeated data patterns. 
            If size of file being compressed (or total files size in case
            of solid archive) is larger than dictionary size, increasing
            the dictionary is likely to increase the compression ratio,
            reduce the archiving speed and increase memory requirements.

For RAR 4.x archive format the dictionary size can be:
            64 KB, 128 KB, 256 KB, 512 KB, 1 MB, 2 MB, 4 MB.

For RAR 5.0 archive format the dictionary size can be:
            128 KB, 256 KB, 512 KB, 1 MB, 2 MB, 4 MB, 8 MB, 16 MB,
            32 MB, 64 MB, 128 MB, 256 MB, 512 MB, 1 GB.

You can use 'k', 'm' and 'g' modifiers to specify the size
            in kilo-, mega- and gigabytes, like -md64m for 64 MB dictionary.
            If no modifier is specified, megabytes are assumed,
            so -md64m and -md64 are equal.

When archiving, RAR needs about 6x memory of specified
            dictionary size, so 512 MB and 1 GB sizes are available
            in 64 bit RAR version only. When extracting, slightly more
            than a single dictionary size is allocated, so both 32
            and 64 bit versions can unpack archives with all dictionaries
            up to and including 1 GB.

If size of all source files for solid archive or size of largest
            source file for non-solid archive is at least twice less than
            dictionary size, RAR can reduce the dictionary size. It helps
            to lower memory usage without decreasing compression.

Default sliding dictionary size is 4 MB for RAR 4.x
            and 32 MB for RAR 5.0 archive format.

Example:

RAR a -s -ma -md128 lib *.dll

create a solid archive in RAR 5.0 format with 128 MB dictionary.

-me[par]
            Set encryption parameters.

Now only "s" parameter is supported. You can use -mes switch
            to skip encrypted files when extracting or testing.

-ms[list]
            Specify file types to store.

Specify file types, which will be stored without compression.
            This switch may be used to store already compressed files,
            which helps to increase archiving speed without noticeable
            loss in the compression ratio.

Optional <list> parameter defines the list of file extensions
 separated by semicolons. For example, -msrar;zip;jpg will
 force RAR to store without compression all RAR and ZIP
 archives and JPG images. It is also allowed to specify wildcard
 file masks in the list, so -ms*.rar;*.zip;*.jpg will work too.
 Several -ms switches are permitted, such as -msrar -mszip
 instead of -msrar;zip.

In Unix -ms switch containing several file types needs to be
 enclosed in quote marks. It protects semicolons from processing
 by Unix shell. Another solution is to use individual -ms<type>
 switches for every file type.

If <list> is not specified, -ms switch will use the default
 set of extensions, which includes the following file types:

7z, ace, arj, bz2, cab, gz, jpeg, jpg, lha, lz, lzh, mp3,
            rar, taz, tbz2, tgz, txz, zst, xz, z, zip, zipx, tzst

-mt<threads>
 Set the number of threads.

<threads> parameter can take values from 1 to 64.
 It defines the recommended maximum number of active threads
 for compression algorithm also as for other RAR modules,
 which can start several threads. While RAR attempts to follow
 this recommendation, sometimes the real number of active
 threads can exceed the specified value.

Change of <threads> parameter slightly affects the compression
 ratio, so archives created with different -mt switches
 will not be exactly the same even if all other compression
 settings are equal.

If -mt switch is not specified, RAR will try to detect
            the number of available processors and select the optimal
            number of threads automatically.

-n<f> Additionally filter included files.

Apply the mask as an additional filter to included file list.
            Wildcards can be used both in the name and file parts of
            file mask. See switch -x description for details on mask syntax.
            You can specify the switch '-n' several times.

This switch does not replace usual file masks, which still
            need to be entered in the command line. It is an additional
            filter limiting processed files only to those matching
            the include mask specified in -n switch. It can help to
            reduce the command line length sometimes.

For example, if you need to compress all *.txt and *.lst
            files in directories Project and Info, you can enter:

rar a -r text Project\*.txt Project\*.lst Info\*.txt Info\*.lst

or using the switch -n:

rar a -r -n*.txt -n*.lst text Project Info

-n@<lf> Read additional filter masks from list file.

Similar to -n<f> switch, but reads filter masks from
 the list file. If you use -n@ without the list file name
 parameter, it will read filter masks from stdin.

This switch does not replace usual list files or file masks,
            which still need to be entered in the command line.
            It is an additional filter limiting processed files only to
            those matching the include mask specified in -n switch.

Example:

rar a -r -n@inclist.txt text Project Info @listfile.txt

-oc     Set NTFS Compressed attribute. Windows version only.

This switch allows to restore NTFS Compressed attribute
            when extracting files. RAR saves Compressed file attribute
            when creating an archive, but does not restore it unless
            -oc switch is specified.

-oh     Save hard links as the link instead of the file.

If archiving files include several hard links, store the first
            archived hard link as usual file and the rest of hard links
            in the same set as links to this first file. When extracting
            such files, RAR will create hard links instead of usual files.

You must not delete or rename the first hard link in archive
            after the archive was created, because it will make extraction
            of following links impossible. If you modify the first link,
            all following links will also have the modified contents
            after extracting. Extraction command must involve the first
            hard link to create following hard links successfully.
    
            This switch is supported only by RAR 5.0 format.

-oi[0-4][:<minsize>]
 Save identical files as references.

Switch -oi0 (or just -oi-) turns off identical file processing,
            so such files are compressed as usual files. It can be used to
            override another -oi value stored in RAR configuration.

If -oi1 (or just -oi) is specified, RAR analyzes the file
            contents before starting archiving. If several identical files
            are found, the first file in the set is saved as usual file
            and all following files are saved as references to this first
            file. It allows to reduce the archive size, but applies some
            restrictions to resulting archive. You must not delete or rename
            the first identical file in archive after the archive was
            created, because it will make extraction of following files
            using it as a reference impossible. If you modify the first file,
            following files will also have the modified contents
            after extracting.
            
            While typically it is possible to unpack a reference without
            unpacking the first file, in some cases it might be necessary
            to involve the first file into extraction to create following
            files successfully. Such cases include a multivolume archive
            stored on several removable media and archives containing
            a very large number of references.

It is recommended to use -oi only if you compress a lot of
 identical files and will not modify an archive later.
 If all identical files are small enough to fit into
 compression dictionary specified with -md<n> switch,
 switch -s can provide more flexible solution than -oi.

Switch -oi2 is similar to -oi1, with the only difference:
            it will display names of found identical files before starting
            archiving.

Switches -oi3 and -oi4 allow to utilize RAR to generate
            lists of identical files. Though you still need to provide
            a dummy archive name to make the command syntax valid,
            in this mode an archive is not created and nothing is compressed.
            If -oi3 is used, file sizes and names are displayed
            and every identical file group is separated with empty line.
            Switch -oi4 displays bare file names and skips the first
            identical file in every file group, so only duplicates
            are listed.

Optional <minsize> value allows to define the minimum file size
 threshold. Files smaller than <minsize> are not analyzed
 and not considered as identical. If this parameter is not
 present, it is assumed to be 64 KB by default. Selecting
 too small <minsize> may increase the time required to detect
 identical files.
 
 Switches -oi1 and -oi2 are supported only by RAR 5.0 format.

Examples:

1) rar a -oi -ma archive

Save contents of current directory to archive.rar.
            Store identical files as references.

2) rar a -oi3:1000000 -r dummy c:\photo\*.jpg

List all duplicate *.jpg files, larger than or equal to
            1000000 bytes, found in c:\photo and its subdirectories.

-ol[a]  Process symbolic links as the link [absolute paths]
            
            Save symbolic links as links, so file or directory contents
            is not archived. In Windows version it also saves reparse points
            as links. Such archive entries are restored as symbolic links
            or reparse points when extracting.

Supported both for RAR 4.x and RAR 5.0 archives in RAR for Unix
            and only for RAR 5.0 archives in RAR for Windows.

In Windows you may need to run RAR as administrator to create
            symbolic links when extracting.

RAR adds all links regardless of target when archiving with
            -ol switch. When extracting, to prevent placing files outside
            of destination directory RAR can skip symbolic links with
            absolute paths, the excessive number of ".." in link target
            or other potentially dangerous link parameters. Also it can
            convert some of links to directories. You can turn off these
            security checks and extract all links as is with -ola switch.

Placing files outside of destination directory can present
            a security risk when extracting. Use -ola switch only if you
            are sure that archive contents is safe, such as your own backup.

Links that are considered safe by RAR are extracted always
            regardless of -ol or -ola switch.

-oni    Allow potentially incompatible names.

While NTFS file system permits file names with trailing spaces
            and dots, also as reserved device names, a lot of Windows
            programs fail to process such names correctly. If this switch
            is not specified, RAR removes trailing spaces and dots, if any, 
            from file names when extracting. It also inserts the underscore
            character in the beginning of reserved device names, such as aux.

Specify this switch if you need to extract such names as is.
            It might be associated with compatibility or even security risks.

Windows version only.

-op<path>
 Set the output path.

Specify the directory to place extracted files in 'x' and 'e'
            commands. This directory is created by RAR if it does not
            exist yet.

Unlike <path_to_extract\> command line parameter, -op switch
 also accepts paths without trailing path separator character.

Example:

rar x -opdest archive

unpacks contents of archive.rar to 'dest' directory.

-or     Rename extracted files automatically if file with the same name
            already exists. Renamed file will get the name like
            'filename(N).txt', where 'filename.txt' is the original file
            name and 'N' is a number starting from 1 and incrementing
            if file exists.

-os     Save NTFS streams. Windows version only.

This switch has meaning only for NTFS file system and allows
            to save alternate data streams associated with a file.
            You may need to specify it when archiving if you use software
            storing data in alternative streams and wish to preserve
            these streams.

Streams are not saved for NTFS encrypted files.

-ow     Use this switch when archiving to save file security
            information and when extracting to restore it.

Unix RAR version saves file owner and group when using
            this switch.

Windows version stores owner, group, file permissions and
            audit information, but only if you have necessary privileges
            to read them. Note that only NTFS file system supports
            file based security under Windows.

-o[+|-] Set the overwrite mode. Can be used both when extracting
            and updating archived files. Following modes are available:

-o           Ask before overwrite
                           (default for extracting files);

-o+          Overwrite all
                           (default for updating archived files);

-o-          Skip existing files.

-p[pwd] Set password

Set password <pwd> to encrypt files when archiving
 or to decrypt when extracting.

Passwords are case-sensitive. Maximum password length is
 127 characters. Longer passwords are truncated to this length.
 If you omit a password in command line, you will be prompted
 with "Enter password" message. You can also use file redirection
 or pipe to specify a password if <pwd> parameter is missing.

Examples:

1) rar a -psecret texts.rar *.txt

add files *.txt and encrypt them with password "secret".

2) rar -p texts.rar *.txt < psw.txt

set contents of psw.txt file as a password.

-qo[-|+]
            Add quick open information [none|force]

RAR archives store every file header containing information
            such as file name, time, size and attributes immediately
            before data of described file. This approach is more damage
            resistant than storing all file headers in a single continuous
            block, which if broken or truncated would destroy the entire
            archive contents. But while being more reliable, such file
            headers scattered around the entire archive are slower to
            access if we need to quickly open the archive contents 
            in a shell like WinRAR graphical interface.

To improve archive open speed and still not make the entire
            archive dependent on a single damaged block, RAR 5.0 archives
            can include an optional quick open record. Such record is
            added to the end of archive and contains copies of file names
            and other file information stored in a single continuous block
            additionally to normal file headers inside of archive.
            Since the block is continuous, its contents can be read quickly,
            without necessity to perform a lot of disk seek operations.
            Every file header in this block is protected with a checksum.
            If RAR detects that quick open information is damaged,
            it resorts to reading individual headers from inside of archive,
            so damage resistance is not lessened.

Quick open record contains the full copy of file header,
            which may be several tens or hundreds of bytes per file,
            increasing the archive size by the same amount. This size
            increase is most noticeable for many small files, when file
            data size is comparable to file header. So by default,
            if no -qo is specified or -qo without parameter is used,
            RAR stores copies of headers only for relatively large files
            and continues to use local headers for smaller files.
            Concrete file size threshold can depend on RAR version.
            Such approach provides a reasonable open speed to archive size
            tradeoff. If you prefer to have the maximum archive open speed
            regardless of size, you can use -qo+ to store copies of all
            file headers. If you need to have the smallest possible archive
            and do not care about archive open speed in different programs,
            specify -qo- to exclude the quick open information completely.

If you wish to measure the performance effect of this switch,
            be sure that archive contents is not stored in a disk cache.
            No real disk seeks are performed for cached archive file,
            making access to file headers fast even without quick open
            record.

-r      Recurse subdirectories. May be used with commands:
            a, u, f, m, x, e, t, p, v, l, c, cf and s.

When used with the commands 'a', 'u', 'f', 'm' will process
            files in all sub-directories as well as the current working
            directory.

When used with the commands x, e, t, p, v, l, c, cf or s will
            process all archives in sub-directories as well as the current
            working directory.

-r-     Disable recursion.

Even without -r switch RAR can enable the recursion
            automatically in some situations. Switch -r- prohibits it.

If you specify a directory name when archiving and if such
            name does not include wildcards, by default RAR adds
            the directory contents even if switch -r is not specified.
            Also RAR automatically enables the recursion if disk root
            without wildcards is specified as a file mask. Switch -r-
            disables such behavior.

For example:

rar a -r- arc dirname

command will add only the empty 'dirname' directory and ignore
            its contents. Following command:

rar a -r- arc c:\

will compress contents of root c: directory only and
            will not recurse into subdirectories.

-r0     Similar to -r, but when used with the commands 'a', 'u', 'f',
            'm' will recurse into subdirectories only for those file masks,
            which include wildcard characters '*' and '?'.

This switch works only for file names. Directory names without
            a file name part, such as 'dirname', are not affected by -r0
            and their contents is added to archive completely unless -r-
            switch is specified.

Example:

rar a -r0 docs.rar *.doc readme.txt

add *.doc files from the current directory and its subdirectories
            and readme.txt only from the current directory to docs.rar
            archive. In case of usual -r switch, RAR would search for
            readme.txt in subdirectories too.

-ri[:<s>]
 Set priority and sleep time. Available only in RAR for Windows.
 This switch regulates system load by RAR in multitasking
 environment. Possible task priority values are 0 - 15.

If is 0, RAR uses the default task priority.
 equal to 1 sets the lowest possible priority,
 15 - the highest possible.

Sleep time <s> is a value from 0 to 1000 (milliseconds).
 This is a period of time that RAR gives back to the system
 after read or write operations while compressing or extracting.
 Non-zero <s> may be useful if you need to reduce system load
 even more than can be achieved with parameter.

Example:

execute RAR with default priority and 10 ms sleep time:

rar a -ri0:10 backup *.*

-rr[N]  Add data recovery record. This switch is used when creating
            or modifying an archive to add a data recovery record to
            the archive. See the 'rr[N]' command description for details.

-rv[N]  Create recovery volumes. This switch is used when creating
            a multivolume archive to generate recovery volumes.
            See the 'rv[N]' command description for details.

-s      Create solid archive. A solid archive is an archive packed by
            a special compression method, which treats several or all
            files, within the archive, as one continuous data stream.

Solid archiving significantly increases compression, when
            adding a large number of small, similar files. But it also
            has a few important disadvantages: slower updating of existing
            solid archives, slower access to individual files, lower
            damage resistance.

Usually files in a solid archive are sorted by extension.
            But it is possible to disable sorting with -ds switch or set
            an alternative file order using a special file, rarfiles.lst.

Example:

create solid archive sources.rar with 512 KB dictionary,
            recursing all directories, starting with the current directory.
            Add only .asm files:

rar a -s -md512 sources.rar *.asm -r

-s<N> Create solid groups using file count

Similar to -s, but resets solid statistics after compressing
 <N> files. Usually decreases compression, but also
 decreases losses in case of solid archive damages.

-sc<charset>[objects]
 Specify the character set.

'Charset' parameter is mandatory and can have one
            of the following values:

U - Unicode UTF-16;
              F - Unicode UTF-8;
              A - the native single byte encoding, which is ANSI
                  for Windows version;
              O - OEM (DOS) encoding. Windows version only.

Endianness of source UTF-16 files, such as list files
            or comments, is detected based on the byte order mark.
            If byte order mask is missing, little endian encoding is assumed.

'Objects' parameter is optional and can have one of
            the following values:

G - log files produced by -ilog switch;
              L - list files;
              C - comment files;
              R - messages sent to redirected files and pipes (Windows only).

It is allowed to specify more than one object, for example,
            -scolc. If 'objects' parameter is missing, 'charset' is applied
            to all objects.

This switch allows to specify the character set for files
            in -z[file] switch, list files and comment files written by
            "cw" command.

Examples:

1) rar a -scol data @list

Read names contained in 'list' using OEM encoding.

2) rar c -scuc -zcomment.txt data

Read comment.txt as Unicode file.

3) rar cw -scuc data comment.txt

Write comment.txt as Unicode file.

4) rar lb -scur data > list.txt

Save archived file names in data.rar to list.txt in Unicode.

-se     Create solid groups using extension

Similar to -s, but resets solid statistics if file extension
            is changed. Usually decreases compression, but also
            decreases losses from solid archive damages.

-sfx[name]
            Create SFX archives. If this switch is used when creating a new
            archive, a Self-Extracting archive (using a module in file
            default.sfx or specified in the switch) would be created.
            In the Windows version default.sfx should be placed in the
            same directory as the rar.exe, in Unix - in the user's
            home directory, in /usr/lib or /usr/local/lib.

Example:

rar a -sfxwincon.sfx myinst

create SelF-eXtracting (SFX) archive using wincon.sfx
            SFX-module.

-si[name]
            Read data from stdin (standard input), when creating, extracting
            or testing an archive. 
            
            When archiving, the optional 'name' parameter allows to specify
            a file name of compressed stdin data in the created archive.
            If this parameter is missing, the name will be set to 'stdin'.

When extracting, the archive name specified in the command line
            is used only in informational messages, but actual archive data
            is read from stdin. So any dummy archive name can be applied.
            
            RAR cannot perform operations requiring backward seeks
            when reading archive data from stdin. Incomplete list of
            features unavailable in such mode includes displaying archive
            comments, testing the recovery record, utilizing the quick open
            information, processing multivolume archives.

Any prompts requiring user interaction are not allowed with
 -si and lead to program termination. If overwriting existing
 files or unpacking encrypted files is possible, avoid such
 prompts with -o[+|-|r], -p<pwd> or -mes switches.

Examples:

1) compress 'type readme.txt' output as 'readme.rar' file

type readme.txt | rar a -sireadme.txt readme.rar

2) unpack docs.rar to 'docs' directory

type docs.rar | rar x -si -o+ -pmypwd dummy docs\

-sl<size>
 Process only those files, which size is less than
 specified in <size> parameter of this switch.
 Parameter <size> must be specified in bytes.

-sm<size>
 Process only those files, which size is more than
 specified in <size> parameter of this switch.
 Parameter <size> must be specified in bytes.

-sv     Create independent solid volumes

By default RAR tries to reset solid statistics as soon
            as possible when starting a new volume, but only
            if enough data was packed after a previous reset
            (at least a few megabytes).

This switch forces RAR to ignore packed data size and attempt
            to reset statistics for volumes of any size. It decreases
            compression, but increases chances to extract a part of data
            if one of several solid volumes in a volume set was lost
            or damaged.

Note that sometimes RAR cannot reset statistics even
            using this switch. For example, it cannot be done when
            compressing one large file split between several volumes.
            RAR is able to reset solid statistics only between separate
            files, but not inside of single file.

Ignored if used when creating a non-volume archive.

-sv-    Create dependent solid volumes

Disables to reset solid statistics between volumes.

It slightly increases compression, but significantly reduces
            chances to extract a part of data if one of several solid
            volumes in a volume set was lost or damaged.

Ignored if used when creating a non-volume archive.

-s-     Disable solid archiving

-t      Test files after archiving. This switch is especially
            useful in combination with the move command, so files will be
            deleted only if the archive had been successfully tested.

-ta[m,c,a,o]<date>
 Process only files modified after the specified date.
 Files matching the specified date exactly are also included.

Format of the date string is YYYYMMDDHHMMSS.
            It is allowed to insert separators like '-' or ':' to
            the date string and omit trailing fields. For example,
            the following switch is correct: -ta2001-11-20
            Internally it will be expanded to -ta20011120000000
            and treated as "files modified after 0 hour 0 minutes
            0 seconds of 20 November 2001".

Use 'm', 'c', 'a' modifiers to specify modification,
            creation (ctime in Unix) and last access time accordingly,
            such as -tac20011120 for creation time or ctime.
            If such modifier is omitted, the modification time is assumed.

It is allowed to use several modifiers in the same switch,
            such as -tamc20190215, to set the same date for all specified
            times. Alternatively you can add several time filtering
            switches to command line. By default, time filters use AND logic,
            so a file must match all such filters to be processed.
            It can be changed to OR logic with 'o' modifier, so a file will
            have to match at least one 'o' filter. For example, use
            -taco20190201 -tamo20190210 to include files created after
            2019-02-01 or modified after 2019-02-10.

-tb[m,c,a,o]<date>
 Process only files modified before the specified date.
 Files matching the specified date exactly are not included.

Format of the switch is the same as -ta<date>.

-tk     Keep original archive date. Prevents RAR from modifying the
            archive date when changing an archive.

-tl     Set archive time to newest file. Forces RAR to set the date of a
            changed archive to the date of the newest file in the archive.

-tn[m,c,a,o]<time>
 Process files newer than the specified time period.
 Files matching the specified time period exactly are also included.

Format of the time string is:

[<ndays>d][<nhours>h][<nminutes>m][<nseconds>s]

For example, use switch -tn15d to process files newer
            than 15 days and -tn2h30m to process files newer than
            2 hours 30 minutes.

Use 'm', 'c', 'a' modifiers to specify modification,
            creation (ctime in Unix) and last access time accordingly,
            such as -tnc2h30m for creation time or ctime.
            If such modifier is omitted, the modification time is assumed.

It is allowed to use several modifiers in the same switch,
            such as -tnmc30d, to set the same period for all specified times.
            Alternatively you can add several time filtering switches to
            command line. By default, time filters use AND logic,
            so a file must match all such filters to be processed.
            It can be changed to OR logic with 'o' modifier, so a file
            will have to match at least one 'o' filter. For example,
            use -tnco30d -tnmo20d to include files with creation time
            newer than 30 days or modification time newer than 20 days.

-to[m,c,a,o]<time>
 Process files older than the specified time period.
 Files matching the specified time period exactly are not included.

Format of the switch is the same as -tn<time>.

-ts[m,c,a,p][+,-,1]
            Save or restore file time (modification, creation or ctime,
            access, preserve).

Use -tsm to save the file modification time. Switch -tsc saves
            the creation time in Windows and the change time, also known
            as ctime, in Unix. Switch -tsa saves the last access time.
            Multiple -ts switches, such as -tsc -tsa, are allowed.
            If 'm', 'c' or 'a' are not specified, all three file times
            are assumed.

Append '+' to store a file time with maximum possible precision.
            Concrete value depends on a operating system and file system
            and can be up 100 nanoseconds in Windows and 1 nanosecond
            in Unix. Append '1' to set 1 second precision or '-' to not save
            a file time. If '+', '-' or '1' are not present, '+' is assumed,
            so -ts+ and -ts both save all three high precision times.

All stored times for same file always have the same precision.
            If different precisions are specified, such as -tsm1 -tsc+,
            common one is selected.

RAR 4.x archives always contain the modification time
            and for RAR 4.x archive -tsm- still saves the modification time
            with the lowest possible 2 second precision. Two other times
            can be disabled. RAR 5.0 archives allow to omit any file time
            including modification, so unpacked files will have the current
            system time. Switches -tsm- -tsc- -tsa- or just -ts- will store
            a low precision modification time for RAR 4.x and no file time
            for RAR 5.0 archive.
            
            If -ts switch is not specified, RAR stores the high precision
            modification time and omits two other times.

By default RAR sets only the modification time for extracted files,
            even if archive contains other times. Use -ts or -ts+ when
            unpacking to set all three times, -tsc and -tsa to set
            creation (ctime in Unix) and last access times, -tsm- or -ts-
            to set the current system time instead of modification time
            stored in archive.

Windows allows to set all three file times when unpacking.
            In Unix we can set the modification and last access, but not
            the change time.

Use -tsp switch to preserve the original last access file time
            of source files when archiving. This switch attempts to keep
            the original last access time of archiving files, but it does not
            control which timestamps are to be stored in archive.
            It has to be combined with other -ts switches for this purpose.
            For example, if we wish to save the last access time to archive
            and preserve the last access time of source files, we need
            to use -tsa -tsp together. Switch -tsp can prevent opening
            some files, which can be opened without it.

While -tsp is supported by RAR for Windows, it is not guaranteed
            to work for other platforms.

It is allowed to combine several modifiers in the same switch,
            such as -tscap instead of -tsc -tsa -tsp.

Examples:

1) rar a -ts backup

Store all file times with the highest possible precision.

2) rar x -tsa backup

Restore modification and last access time. Switch -tsm is not
            required, because RAR sets the modification time by default.
            If we wish to restore only the last access time, we should use
            -tsm- -tsa switches.

3) rar a -tsm1 -tsc1 -tsp backup

Store low precision modification and creation or ctime times.
            Preserve the last access time of source files.
            Alternatively we could use -tsm1c1p instead of -tsm1 -tsc1 -tsp.

-u      Update files. May be used with archive extraction or creation.
            The command string "a -u" is equivalent to the command 'u', you
            could also use the switch '-u' with the commands 'm' or 'mf'. If
            the switch '-u' is used with the commands 'x' or 'e', then files
            not present on the disk and files newer than their copies on the
            disk would extracted from the archive.

-v      Create volumes with size autodetection or list all volumes

This switch may be used when creating or listing volumes.

In the first case it enables volume size autodetection,
 so new volumes will use all available space on the destination
 media. It is convenient when creating volumes on removable
 disks. You may read more about volumes in -v<size> description.

In the second case, when this switch is used together with
            'V' or 'L' command, it forces RAR to list contents of all
            volumes starting from that specified in the command line.
            Without this switch RAR displays contents of only one single
            specified volume.

-v<size>[k|b|m|M|g|G]
 Create volumes with size=<size>*1000 [*1024 | *1].
 By default this switch uses <size> as thousands (1000) of bytes
 (not 1024 x bytes). You may also enter the size in kilobytes
 using the symbol 'k', in bytes using the symbol 'b',
 megabytes - 'm', millions of bytes - 'M', gigabytes - 'g',
 billions (milliards) of bytes - 'G'.

If the size is omitted, autodetection will be used.

It is allowed to enter decimal fractions using the dot as
            the decimal mark. For example, -v1.5g means 1.5 gigabytes.

You may specify several -v switches to set different sizes
            for different volumes. For example:

rar a -v100k -v200k -v300k arcname

sets 100 KB size for first volume, 200 KB for second
            and 300 KB for all following volumes.

If volumes are created on removable media, then after
            the creation of the first volume, the user will be prompted
            with:

Create next volume: Yes/No/All

At this moment in time, you should change the disks. Answering
            'A' will cause all volumes to be created without a pause.

By default RAR volumes have names like 'volname.partNNN.rar',
            where NNN is the volume number. For RAR 4.x archive format
            using -vn switch it is possible to select another,
            extension based naming scheme, where the first volume file
            in a multi-volume set has the extension .rar, following
            volumes are numbered from .r00 to .r99. RAR 5.0 archives
            do not support -vn and extension based names.

When extracting or testing a multi-volume archive you must use
            only the first volume name. If there is no next volume
            on the drive and the disk is removable, the user will be
            prompted with:

Insert disk with <next volume name>

Insert the disk with the correct volume and press any key.

If while extracting, the next volume is not found and volumes
            are placed on the non-removable disk, RAR will abort with
            the error message:

Cannot find <volume name>

Archive volumes cannot be modified. The commands 'd', 'f', 'u',
            's' cannot be used with Multi-volume sets. The command 'a' may
            be used only for the creation of a new multi-volume sequence.

It is possible, although unlikely, that the file size, of a file
            in a multi-volume set, could be greater than its uncompressed
            size. This is due to the fact that 'storing' (no compression if
            size increases) cannot be enabled for multi-volume sets.

Archive volumes may be Self-Extracting (SFX). Such an archive
            should be created using both the '-v' and '-sfx' switches.

Example:

create solid volumes 1 GB each:

rar a -s -v1g volume.rar bitmaps

-vd     Erase disk contents before creating volume

All files and directories on the target disk will be erased
            when '-vd' is used.  The switch applies only to removable
            media, the hard disk cannot be erased using this switch.

-ver[n] File version control

Forces RAR to keep previous file versions when updating
            files in the already existing archive. Old versions are
            renamed to 'filename;n', where 'n' is the version number.

By default, when unpacking an archive without the switch
            -ver, RAR extracts only the last added file version, the name
            of which does not include a numeric suffix. But if you specify
            a file name exactly, including a version, it will be also
            unpacked. For example, 'rar x arcname' will unpack only
            last versions, when 'rar x arcname file.txt;5' will unpack
            'file.txt;5', if it is present in the archive.

If you specify -ver switch without a parameter when unpacking,
            RAR will extract all versions of all files that match
            the entered file mask. In this case a version number is
            not removed from unpacked file names. You may also extract
            a concrete file version specifying its number as -ver parameter.
            It will tell RAR to unpack only this version and remove
            a version number from file names. For example,
            'rar x -ver5 arcname' will unpack only 5th file versions.

If you specify 'n' parameter when archiving, it will limit
            the maximum number of file versions stored in the archive.
            Old file versions exceeding this threshold will be removed.

When archiving with -ver switch, it is recommended to avoid
            names in 'filename;n' format among files to add. Such names
            can lead to duplicate entries if old version with same name
            either is present in archive or will be created later.

-vn     Use the old style volume naming scheme

-vp     Pause before each volume

By default RAR asks for confirmation before processing
            next volume only when archiving to removable disks and only
            if free disk space is less than volume size. This switch
            forces RAR to always ask for such confirmation when creating
            or extracting volumes. For example, it can be useful if you
            wish to copy new volumes to another media immediately after
            creating.

-w Assign work directory to .
 
 RAR creates temporary files in some operations like archive
 modification. This switch can be used to specify the directory
 for such temporary files. This directory must be already exist.

Example:

use d:\tmp directory for temporary files when adding a new
            comment to info.rar

RAR c -wd:\tmp -zcomment.txt info.rar

-x<f> Exclude the specified <f> file or directory. Wildcards can be
 used in both the name and path parts of file mask. You can
 specify the switch '-x' several times to define several
 exclusion masks in the same command line.

If mask contains wildcards, it applies to files in current
            directory and its subdirectories. It is not recursive without
            wildcards, so "filename" mask will exclude 'filename' file
            only in current directory when archiving or in root archive
            directory when extracting.

Use "*\filename" syntax to exclude "filename" recursively
            in all directories.

If you know the exact path to file, you can use "path\filename"
            syntax to exclude only this copy of "filename". If you use
            -xpath\filename syntax when unpacking an archive, "path" must be
            the path inside of archive, not the file path on the disk after
            unpacking.

By default, masks containing wildcards are applied only to files.
            If you need a mask with wildcards to exclude several directories,
            use the special syntax for directory exclusion masks.
            Such masks must have the trailing path separator character
            ('\' for Windows and '/' for Unix). For example, "*tmp*\" mask
            will exclude all directories matching "*tmp*" and "*\tmp\" will
            exclude all 'tmp' directories. Since wildcards are present,
            both masks will be applied to contents of current directory
            and all its subdirectories.

If you wish to exclude only one directory, specify the exact
            name of directory including the absolute or relative path
            without any wildcards. In this case you do not need to append
            the path separator to mask, which is required only for directory
            exclusion masks containing wildcards to distinguish them
            from file exclusion masks.

Examples:

1) rar a -r -x*.jpg -x*.avi rawfiles

compress all files except *.jpg and *.avi in current directory
            and its subdirectories;

2) rar a -r -x*\temp\ savec c:\*

compress all files on the disk c: except 'temp' directories
            and files inside of 'temp' directories;

3) rar x -x*.txt docs

extract all files except *.txt from docs.rar.

-x@<lf> Exclude files listed in the specified list file. If you use -x@
 without the list file name parameter, it will read file names
 from stdin.

Example:

rar a -x@exlist.txt arch *.exe

-y      Assume Yes on all queries.

-z[file]
 Read archive comment from file <file>.
 
 This switch can be used with any archive modification command
 to read the archive comment from file and add it to archive.
 Use with -sc switch if you need to specify the character set
 for comment text file. If <file> is not present, comment
 is read from stdin.

Limitations
 ~~~~~~~~~~~

Command limitations:

Commands 'd','u','f','c','cf' will not operate with archive volumes.

Command 'a' cannot be used to update an archive volume, only to
    create a new one.

Exit values
 ~~~~~~~~~~~

RAR exits with a zero code (0) in case of successful operation.
    Non-zero exit code indicates some kind of error:

Code   Description

0     Successful operation.
     1     Non fatal error(s) occurred.
     2     A fatal error occurred.
     3     Invalid checksum. Data is damaged.
     4     Attempt to modify an archive locked by 'k' command.
     5     Write error.
     6     File open error.
     7     Wrong command line option.
     8     Not enough memory.
     9     File create error
    10     No files matching the specified mask and options were found.
    11     Wrong password.
    12     Read error.
   255     User stopped the process.

Glossary
 ~~~~~~~~

Archive      Special file containing one or more files optionally
                 compressed and/or encrypted.

Compression  A method of encoding data to reduce it's size.

Checksum     Value calculating for data block or file and allowing to
                 check data or file validity.

SFX archive  SelF-eXtracting archive. Archive in executable format,
                 consisting of self-extracting module followed by
                 compressed data. It is enough to run such executable to
                 start extraction.

Solid        An archive packed using a special compression method which
                 sees all files as one continuous data stream. Particularly
                 advantageous when packing a large number of small files.

Volume       Part of a split archive. Splitting an archive to volumes
                 allows storing them on several removable disks.
                 Solid volumes must be extracted starting from first
                 volume in sequence.

${this.title}

Code Editor : Rar.txt